Aircon Relocation
Compare up to 5 aircon relocation quotes from 5-Star rated experts across South Africa.
Get the best quoteWhat are you moving?
Aircon relocation prices in South Africa
| Job | Ballpark (2026) |
|---|---|
| Single split move, typical | R3 500 – R4 500 |
| Re-gas after the move, split | R750 – R1 500 |
| Leak repair if one is found | R300 – R1 000 |
| Re-gas, multi-split or commercial | R1 200 – R3 000+ |
| New 9 000 BTU split, fitted | R8 000 – R11 000 |
| New 12 000 BTU split, fitted | R9 500 – R14 000 |
| New 18 000 BTU split, fitted | R13 000 – R18 000 |
Get an accurate quote. Extra pipework, new brackets, fault repairs, hard access and travel cost more. Check if the price shows VAT.
Benodig jy 'n lugversorger-verskuiwing? Kry tot 5 gratis kwotasies van installeerders met 5-ster-resensies regoor Suid-Afrika.
What pushes the price of aircon relocation up
- Longer pipe runs and new brackets at the new spot
- Stairs, roof work, tight façades and gates that limit access
- Re-gas, fault repairs or moving the electrical isolator
Types of aircon relocation
| Type | Best for | Keep in mind |
|---|---|---|
| Outdoor unit only | Noise, looks or renovation clearance | Longer pipe run means vacuum and re-gas |
| Indoor unit only | New wall position in the same room | Drain fall and pipe route decide feasibility |
| Room to room | Reusing a unit after a layout change | Capacity may suit the old room only |
| House move | Taking a well-kept unit to a new home | Old pipes are cut, expect new pipework |
| Multi-split move | Several indoor heads on one outdoor unit | Each head and pipe run adds labour |
Aircon relocation materials and specs compared
| Material | Strengths | Watch out for |
|---|---|---|
| R32 refrigerant | Current standard, easy to source | Mildly flammable, registered installers only |
| R410A refrigerant | Common in mid-age units | Needs R410A-rated gauges and tools |
| R22 refrigerant | Found in older units | Scarce, costly gas, replacement often wins |
| Copper pipe, 0.8 mm wall | Holds R410A and R32 pressure | Kinked or corroded pipe gets replaced |
| Flare joints | Remade quickly with a torque wrench | Never reuse a flare, re-flare every time |
| Pump down or recovery | Pump down keeps gas in outdoor unit | Recovery suits doubtful valves or compressor |
Refrigerant handling
- Ask how the gas is saved: pump down or recovery.
- A clean pump down means no recharge bill afterwards.
- Recovery into a cylinder suits doubtful valves or compressors.
- Gas type and weighed charge should appear on your invoice.
Pipework and flares
- Old flares are never reused. The installer re-flares each joint.
- Pipe left open to air for 15 seconds or more needs a vacuum.
- Kinked, cracked or corroded copper is replaced, not reused.
- A nitrogen hold test after reconnecting should show no pressure drop.
Move or replace
- At 10 years or more, ask what a new fitted unit costs.
- R22 units are costly to regas, so replacement often wins.
- Recent repairs or weak cooling are signs to replace instead.
- Ask the technician to test gas level and electrics first.
Approval for aircon relocation
- A move counts as a modification, so refrigerant work needs a fresh Certificate of Conformity.
- If the isolator or circuit moves, an electrician certifies it under SANS 10142.
- Outdoor unit on a street façade, boundary wall or in a complex? Ask building control and trustees first.
Aircon relocation services
| Service | What to ask for |
|---|---|
| Outdoor unit relocation | Pump-down method and new bracket position |
| Indoor unit relocation | New pipe route, drain fall, wall repair |
| Whole-house move | Uninstall and refit dates priced separately |
| Multi-split relocation | Price per indoor head and pipe run |
| Refrigerant recovery and recharge | Gas type and weighed charge on invoice |
| Isolator or circuit move | Electrical certificate for any moved circuit |
Practical aircon relocation tips
- Photograph the outdoor unit label to show model and refrigerant type.
- Check your brand's warranty terms before anyone disconnects the unit.
- Moving house? Get uninstall and refit dates in writing.
- Ask for any fault repairs to be itemised before work continues.
- Clear stairs, gates and roof access before the team arrives.
- A move with new pipe runs can take 4 to 8 hours.
What to send with your request
- Brand and model of unit
- Approximate age of the unit
- Photos of old and new spots
- Access notes (stairs, roof)
- Estate or complex rules, if any
Pick whichever quote suits you. The experts run their own businesses and leaderr charges you nothing.
Frequently asked questions
How much does aircon relocation cost?
A typical single split move runs about R3 500 – R4 500. Longer pipes, hard access and a re-gas push it higher.
Should I move my old aircon or buy a new one?
If your unit is over 10 years old or runs R22, price a new one. A fitted 9 000 BTU split starts around R8 000.
Who may legally move my aircon?
By law, refrigerant work needs a registered person. Ask for their registration card and the certificate before you pay.
Will moving my aircon myself void the warranty?
It can. Some brands only keep cover if an approved contractor does the move.
How long does an aircon relocation take?
A simple same-wall move takes a few hours. A move with new pipework can take 4 to 8 hours.
Hoeveel kos 'n lugversorger-verskuiwing?
Reken op ±R3 500 tot ±R4 500 vir 'n gewone split-eenheid. Gas, langer pype en moeilike toegang kos ekstra.
Aircon Relocation near you
Compare quotes from 5-Star rated experts near you.
Other aircon installer types
View popular areas →