Gas Braai Installation
Request gas braai installation quotes from 5-Star rated experts across South Africa.
Get the best quote
Which gas braai are you fitting?
Gas braai installation prices in South Africa
| Gas braai job | Ballpark (2026) |
|---|---|
| Gas point and certificate, braai supplied | R3 000 – R5 500 |
| Built-in gas unit only, entry to mid-range | R8 000 – R25 000 |
| Premium 304 or 316 built-in unit only | R41 500 – R59 285 |
| Gas and wood combo insert only | R12 000 – R20 000 |
| Counter-top 5-burner stainless unit | From ±R13 100 |
| Flue or chimney for an enclosed area | R4 000 – R12 000 |
| Complete built-in with brickwork and counter | R22 000 – R38 000 |
| Indoor gas braai, no flue, all-in | R25 000 – R60 000 |
Get an accurate quote. Flue kits, pipe length, cages and surround work change the total. Ask whether VAT is in the price.
Benodig jy 'n gasbraai-installasie? Kry tot 5 gratis kwotasies van installeerders met 5-ster-resensies regoor Suid-Afrika.
What pushes the price of gas braai installation up
- Stainless grade, burner count and unit width
- Flue kit, chimney or an enclosed braai area
- Longer pipe runs, cylinder cage and extra cylinders
Types of gas braai installation
| Type | Best for | Keep in mind |
|---|---|---|
| Built-in gas braai | Permanent patio or outdoor kitchen setups | Enclosed areas need a flue |
| Drop-in gas grill | Counter and outdoor kitchen cut-outs | Cut-out must match the model exactly |
| Gas insert in old braai | Upgrading a charcoal braai without rebuilding | Insert must fit the existing opening |
| Gas and wood combo | Households wanting both fuels | Costs more and needs a flue |
| Natural gas braai | Properties on a piped gas network | Unit is set for one gas only |
| Counter-top or freestanding | Small patios and fast fitting | Still needs a compliant cylinder spot |
Gas braai installation materials and specs compared
| Material | Strengths | Watch out for |
|---|---|---|
| 304 stainless steel | Corrosion resistant, long outdoor life | Adds R5 000 – R15 000 to unit |
| 316 marine stainless | Best resistance to chloride corrosion | Highest unit price |
| 430 stainless steel | Cheaper body, fine under cover | Not rust resistant outdoors |
| Mild steel | Lowest unit price | Suits covered use only |
| Burner rating | Premium units list 30 000 BTU per burner | Total load sizes pipe and regulator |
| Copper or PEX-AL-PEX pipe | Approved for fixed gas lines | White plumbing pipe fails under gas |
Stainless grade
- Grade 304 suits most patios, while 316 suits sea-facing spots.
- Grade 430 is not rust resistant, so keep it under cover.
- Ask which grade the body, burners and grids use.
- Some units mix 430 internals with a 304 frame.
Cylinder and pipework
- Cylinders stay 5 m from plug points, switches and pool pumps.
- Keep a 3 m radius around cylinders clear of bins, wood and leaves.
- Use gas-rated copper or PEX-AL-PEX; white plumbing pipe fails.
- Cylinders directly under a grill flame need proper shielding.
Flue and surround
- Enclosed braai areas usually carry flue costs of R4 000 – R12 000.
- Flue kits are often sold separately from the braai itself.
- Flue width differs per model, so confirm before building the surround.
- Brickwork of R4 000 – R9 000 is a separate line in many quotes.
Approval for gas braai installation
- Fixed gas braais must be fitted by a SAQCC Gas registered installer.
- The installer issues a Gas Certificate of Conformity after testing the work.
- Ask your municipality's building control before adding a roof, flue opening or large surround.
Gas braai installation services
| Service | What to ask for |
|---|---|
| Built-in gas braai fitting | Gas point, regulator and certificate in writing |
| Drop-in grill installation | Cut-out size confirmed before ordering |
| Charcoal braai gas conversion | Insert fit, flue and gas point costed |
| Flue and chimney work | Flue kit included or priced separately |
| Cylinder cage and bracket | Cage, bracket and regulator listed |
| Certificate for existing braai | Inspection, hose check and Gas CoC |
Practical gas braai installation tips
- Clean burner tubes at least monthly to avoid burn-back fires.
- Use soapy water on stainless, never chloride or ammonia cleaners.
- Keep your invoice and CoC, as you would for a gas stove; manufacturers ask for both on warranty claims.
- Warranties run about 2 to 3 years, with burners sometimes only 1.
- Check the label: a unit is set for LPG or natural gas, not both.
- Inspect burners and flame tamers for rust at every clean.
What to send with your request
- Photos of braai area
- Braai brand and model
- Cylinder size and position
- Open, covered or enclosed patio
- Complex or body corporate rules
Accepting a quote is your call alone. The installers are independent businesses, and it costs you nothing to use leaderr.
Frequently asked questions
How much does a gas braai installation cost?
Gas fitting alone runs about R3 000 – R5 500. A full built-in with brickwork and counter is about R22 000 – R38 000.
Does a built-in gas braai need a certificate?
Yes. A SAQCC Gas registered installer must issue a Gas CoC, and manufacturers often ask for it with warranty claims. The same certificate rules apply if you add a gas hob to your outdoor kitchen.
Is a gas braai better than a charcoal one?
Gas heats in about 7 to 10 minutes, while charcoal can take up to 40. Charcoal wins on smoky flavour, and a combo unit gives you both.
Is 304 or 316 stainless worth paying for?
304 adds R5 000 – R15 000 but can extend a braai's life by a decade or more. 316 resists salt corrosion best.
Can I convert my charcoal braai to gas?
Often yes, using a gas insert that fits your opening. A registered installer must fit the gas point and issue the certificate.
Hoeveel kos 'n gasbraai-installasie?
Reken op ±R3 000 tot ±R5 500 vir die gaspunt en sertifikaat, en ±R22 000 tot ±R38 000 vir 'n volledige ingeboude braai. Kry tot 5 kwotasies vir jou eie terrein.
Gas Braai Installation near you
Compare quotes from 5-Star rated experts near you.
Other gas installer types
View popular areas →