Gas Hob Installation
Request gas hob installation quotes from 5-Star rated experts across South Africa.
Get the best quote
Gas hob installation prices in South Africa
| Setup (excluding hob) | Ballpark installed (2026) |
|---|---|
| Hob swap on existing gas line | From ±R1 500 |
| In-cupboard setup, 9 kg cylinder | R1 600 – R3 000 |
| Outside single-cylinder setup | R3 000 – R4 800 |
| Outside setup, long or complex run | Up to ±R9 000 |
| Extra pipe beyond 5 m | ±R150 per metre |
| Lockable cylinder cage | R850 – R1 600 |
| Cupboard vent louvre | R250 – R400 |
| Cylinder slab for ground mounting | R300 – R500 |
| 60 cm four-burner hob, bought separately | From ±R2 500 |
Get an accurate quote. The hob, cylinder, cage, extra pipe and wall work can add to the total. Ask whether VAT is in the price.
Benodig jy 'n gaskookplaat-installasie? Kry tot 5 gratis kwotasies van installeerders met 5-ster-resensies regoor Suid-Afrika.
What pushes the price of gas hob installation up
- Long pipe runs, wall drilling and extra bends
- An outside cylinder with cage, slab or changeover kit
- Cupboard vents and worktop or cabinet changes
Types of gas hob installation
| Type | Best for | Keep in mind |
|---|---|---|
| Built-in stainless steel hob | Heavy daily cooking and busy kitchens | Fingerprints show; cheaper grades mark easily |
| Gas-on-glass hob | Sleek, modern kitchens | Glass can crack under heavy knocks |
| 30 cm domino hob | Small kitchens or a second zone | Only one or two burners |
| 90 cm hob with wok burner | Large kitchens and stir-fry cooking | Needs bigger cut-out and stronger extraction |
| Freestanding gas stove | No worktop cut-out needed | Usually costs more than a hob |
| Natural gas hob on piped supply | Properties on a gas network | Jets must match the supply |
Gas hob installation materials and specs compared
| Material | Strengths | Watch out for |
|---|---|---|
| 304 stainless steel top | Durable and the most common grade | Not scratch proof; cheaper hobs use 201 |
| Borosilicate glass top | Smooth and easy to wipe | Can crack under heavy knocks |
| Cast iron pan supports | Heavy and stable under big pots | Lift off carefully when cleaning |
| Flame failure thermocouple | Cuts gas if a flame goes out | Knocks or dirt can damage it |
| 2.8 kPa LPG regulator | Correct pressure for LPG hobs | Check your hob manual before buying |
| PEX-AL-PEX gas pipe | Flexible, suits short outside runs | Longer runs cost extra per metre |
Cylinder position
- One 9 kg cylinder per cupboard, with nothing else stored inside.
- Cupboards need permanent vents, high and low, at least 60 cm² each.
- No plug points may sit in the cylinder cupboard.
- Changeover kits and multi-cylinder manifolds must stand outdoors.
Gas type and regulator
- Some hobs leave the factory fitted with natural gas jets.
- Your installer swaps the jets when you convert to LPG.
- LPG hobs normally need a 2.8 kPa regulator meeting SANS 1237.
- Never connect a hob straight to a cylinder with a loose hose.
Kitchen layout and extraction
- Keep switches and sockets at least 200 mm sideways from any burner.
- Hoods sit higher over gas, often 650 to 760 mm above the hob.
- Check the worktop cut-out size before you buy the hob.
- Keep an indoor cylinder at least 300 mm away from the hob.
Approval for gas hob installation
- Only an SAQCC Gas registered practitioner may legally fit your hob.
- Keep the signed Certificate of Conformity issued after the installer tests the work.
- Ask your municipality's fire department about local gas by-laws, and your body corporate about cylinders and drilling.
Gas hob installation services
| Service | What to ask for |
|---|---|
| New hob, cylinder in cupboard | Vent louvre, regulator and CoC included |
| New hob, outside cylinder | Pipe run length and wall drilling included |
| Hob swap on existing line | Leak test and flame failure check |
| LPG or natural gas conversion | Correct jet set and tested burners |
| Worktop cut-out and fitting | Cut-out matched to your hob size |
| Cylinder cage and slab | Cage and slab itemised on the quote |
Practical gas hob installation tips
- A 60 cm four-burner hob starts at about R2 500 in major retailers.
- Pipe beyond 5 m typically adds about R150 per metre.
- Have the regulator and manifold inspected at least every five years.
- Check for leaks with soapy water, never a naked flame.
- Keep the spare jet set that came in the hob box.
- Run the extractor hood about 20 minutes after cooking.
What to send with your request
- Hob make and model
- Worktop and cupboard photos
- Gas type: LPG or natural
- Distance to nearest outside wall
- House, flat or office
You choose the quote you prefer. The experts are independent businesses, and leaderr is free to use.
Frequently asked questions
How much does a gas hob installation cost?
Expect about R1 600 – R3 000 with a cupboard cylinder and R3 000 – R4 800 with an outside cylinder. The hob and cylinder are extra.
How often should a hob installation be serviced?
Have the regulator and manifold inspected at least every five years. Check burner parts and the flame failure device whenever you clean.
Does a new hob come with paperwork?
Yes. A registered installer tests the work and issues a Certificate of Conformity. Do not accept a cash install without one. Certificate rules also apply if you add a gas geyser.
Is a gas hob better than a freestanding gas stove?
A hob needs a worktop cut-out, while a stove slides in and connects. Stoves usually cost more to buy.
Can the cylinder stay in my kitchen cupboard?
Yes, one 9 kg cylinder with permanent vents and no plug points in that cupboard. Larger cylinders go outside.
Hoeveel kos 'n gaskookplaat-installasie?
Reken op ±R1 600 tot ±R3 000 met 'n silinder in die kas en ±R3 000 tot ±R4 800 met 'n buite-silinder, uitgesluit die kookplaat en silinder. Vra tot 5 kwotasies om pryse te vergelyk.
Gas Hob Installation near you
Compare quotes from 5-Star rated experts near you.
Other gas installer types
View popular areas →