What needs coating?
Epoxy floor prices in Pretoria
| System | Ballpark installed per m² (2026) |
|---|---|
| Water-based, 1–2 mm | R165 – R300 |
| Chemical-resistant, 3 mm and thicker | R350 – R1 000 |
| Decorative flake | R500 – R1 200 |
| Metallic | R700 – R1 500 |
| 3D seamless | R900 – R1 500 |
| High-build industrial, 6–8 mm | From ±R450 |
| Anti-slip additive (add-on) | R25 – R55 per m² |
| Crack repair (add-on) | R45 – R85 per linear metre |
Get an accurate quote. Slab repairs, diamond grinding, anti-slip aggregate and topcoat upgrades cost extra. Ask whether VAT is in the price.
Benodig jy 'n epoksievloer-installasie in Pretoria? Kry tot 5 gratis kwotasies van plaaslike installeerders met 5-ster-resensies.
What pushes the price up in Pretoria
- Repairing cracked or moving slabs before any coating goes on
- UV-stable polyurethane topcoats for sunlit garage entrances
- Thicker 6–8 mm builds for forklifts and pallet jacks
Types of epoxy floors in Pretoria
| Type | Best for | Keep in mind |
|---|---|---|
| Water-based, 1–2 mm | Light commercial spaces and garages at home | Light-duty only, not for forklifts |
| Chemical-resistant, 3 mm+ | Workshops, panel beaters, service areas | Costs more and needs thorough slab prep |
| High-build, 6–8 mm | Warehouses and factories with forklift traffic | Quoted differently from domestic floors |
| Decorative flake | Garages and showrooms needing slip resistance with flake epoxy | Full-broadcast flake costs more |
| Metallic and 3D | Showrooms, lobbies and feature areas | Highest price band, labour intensive |
Epoxy floor materials compared
| Material | Strengths | Watch out for |
|---|---|---|
| Epoxy resin | Hard, chemical and abrasion resistant | Direct sun turns floors amber and makes them chalk |
| Polyurethane | Flexible, UV-stable, handles temperature swings | Usually sits as topcoat over epoxy |
| Polyaspartic | UV-stable and cures within hours | Priced higher than standard epoxy |
| Standard resin topcoat | Gloss and easy cleaning | About 2–4 years' service in sun |
| UV-stable polyurethane topcoat | Strong UV resistance, 6–12 years' service | Still needs a sound, dry slab |
Sun and UV
- Epoxy ambers and chalks under direct sunlight.
- Ask for a UV-stable polyurethane topcoat near open doors.
- Standard resin topcoats are rated at about 2–4 years in strong sun.
- UV-stable polyurethane topcoats are rated at about 6–12 years.
Clay soils and cracks
- Clay soils here can heave and crack your slab.
- Structural cracks need repair before any coating goes on.
- Crack repair is often priced at R45 – R85 per linear metre.
- Ask for a moisture test, because damp slabs make coatings bubble and peel.
Warehouses and workshops
- Forklifts and pallet jacks call for a 6–8 mm build.
- Ask for marked forklift lanes and pedestrian walkways in the quote.
- Panel beaters and workshops need chemical-resistant systems rated for tool drops.
- Add anti-slip aggregate where floors get wet, roughly R25 – R55 per m².
Approval in Pretoria
- Pretoria falls under the City of Tshwane Metropolitan Municipality in Gauteng.
- Approved plans are needed for structural changes, such as new walls or extensions.
- Ask City of Tshwane building control if your job goes beyond coating. Complexes and estates may need trustee or HOA sign-off.
Epoxy flooring services in Pretoria
| Service | What to ask for |
|---|---|
| Garage floors | Flake system with anti-slip and UV topcoat |
| Workshop and panel beater floors | Chemical-resistant system, tool-drop rated build |
| Warehouse and factory floors | 6–8 mm build with marked lanes |
| Kitchen and food-area floors | Anti-slip, easy-clean topcoat |
| Showroom and office floors | Metallic epoxy or decorative finish samples |
| Crack repair and re-coating | Old coating removed by diamond grinding |
Practical epoxy flooring tips
- Ask for diamond grinding, not acid etching, to prepare the slab, even if you choose a self levelling epoxy finish.
- New concrete needs 28 days to cure plus a moisture test.
- A typical epoxy job takes 2–3 days including prep and cure.
- Clay soils here crack slabs, so have repairs done before coating.
- Sunlit garage entrances need a UV-stable polyurethane topcoat, not plain epoxy.
- Warehouse and factory floors in Pretoria usually need a 6–8 mm build.
What to send with your request
- Floor area in square metres
- Photos showing cracks and stains
- Type of space and traffic
- Old paint or coating on slab
- Estate or body corporate rules
Matching costs you nothing, and the final call is yours. Each Pretoria installer on leaderr runs their own independent business, so you pick the quote you want to take.
Frequently asked questions
What does an epoxy floor cost per square metre in Pretoria?
Expect about R165 – R300 for a basic 1–2 mm system and R350 – R1 000 for chemical-resistant builds. Ask each installer whether VAT is included.
Must I get approval from the City of Tshwane before epoxying a floor?
Approved plans are needed for structural changes. Ask City of Tshwane building control if your project goes beyond coating the floor.
What epoxy system works best in a Pretoria home garage, and what suits a warehouse?
Homes usually suit a 1–2 mm or flake system with a UV-stable topcoat, and our garage epoxy guide covers the options. Warehouses typically need a 6–8 mm build.
Will an epoxy floor hold up in a sunny garage entrance?
Plain epoxy ambers and chalks in direct sun. Ask for a UV-stable polyurethane topcoat.
My Pretoria slab has cracks. Can it still be coated?
Yes, once the cracks are repaired. Damp or moving slabs must be sorted first, or the coating can bubble and peel.
Wat kos epoksievloere per vierkante meter in Pretoria?
Reken op ±R165 tot R300 per m² vir 'n basiese stelsel en tot R1 500 vir metaal- of 3D-afwerkings. Vra tot 5 kwotasies om pryse te vergelyk.
Popular Areas For Epoxy Flooring
Compare quotes from 5-Star rated experts near you.
Epoxy Flooring by type
- Epoxy Flake Flooring
- Garage Epoxy Flooring
- Metallic Epoxy Flooring
- Non Slip Epoxy Flooring
- Self Levelling Epoxy