Self Levelling Epoxy
Request self levelling epoxy quotes from 5-Star rated experts across South Africa.
Get the best quote
Where will the floor be used?
Self levelling epoxy prices in South Africa
| System and thickness | Ballpark installed (2026) |
|---|---|
| Thin self-levelling, 1–2 mm | R165 – R300 |
| Office or shop floor, 3 mm | R350 – R580 |
| Warehouse high-build, 3–5 mm | R350 – R800 |
| Food-grade system, 3–6 mm | R500 – R1 200 |
| Heavy-duty system, 6–8 mm | From ±R450 |
| Premium installer rate, epoxy | From ±R480 |
| Levelling screed beneath (extra) | R180 – R350 |
Get an accurate quote. Screed levelling, crack repairs, UV topcoats and site travel are often priced separately. Confirm if VAT is included, as guides differ.
Benodig jy 'n epoksievloer wat self gelyk vloei? Kry tot 5 gratis kwotasies van installeerders met 5-ster-resensies regoor Suid-Afrika.
What pushes the price of self levelling epoxy up
- Thicker builds, since resin use rises with every extra millimetre
- Levelling screed or epoxy mortar repairs on uneven, cracked slabs
- Polyurethane topcoat or anti-slip grit added to the system
Types of self levelling epoxy
| Type | Best for | Keep in mind |
|---|---|---|
| Thin self-smoothing, 1–2 mm | Light-use garages and small offices | Slab must already be close to flat |
| Standard 3 mm pour | Shops, offices and workshops | Needs a dry slab and skilled rolling |
| Broadcast quartz system | Wet areas that need extra grip | Textured surface needs more cleaning effort |
| Heavy-duty, 4–6 mm | Forklifts, workshops and food plants | More resin per m² means higher price |
| Self-levelling polyurethane | Sunlit floors and hot-water cleaning | Expect a higher price for every m² compared with epoxy |
Self levelling epoxy materials and specs compared
| Material | Strengths | Watch out for |
|---|---|---|
| 100% solids epoxy, 2–3 mm | Seamless gloss, good chemical resistance | Needs dry slab and fast spike rolling |
| Solvent-free epoxy, 3–6 mm | Thick build for heavy wear | More material per m², higher cost |
| Epoxy mortar fill | Repairs cracks, holes and low spots | Must cure before primer goes on |
| Epoxy primer | Seals pores, stops air rising | Skipped primer causes pinholes |
| Aliphatic polyurethane topcoat | Non-yellowing, holds colour in sun | Extra layer adds to the price |
| Self-levelling cement screed | Flattens an uneven slab first | Adds R180 – R350 per m² |
Slab condition and priming
- Cracks, holes and low spots are filled with epoxy mortar first.
- Primer seals the pores so air cannot rise into wet resin.
- Laitance is ground off so the resin bonds to sound concrete.
- A damp slab bubbles and blisters, so ask for a moisture reading.
Pouring and spike rolling
- Resin is spread with a notched rake, then spike rolled straight away.
- Pot life is often 30 to 40 minutes, so work goes in batches.
- Visible joins between batches come from slow spreading or small mixes.
- Dust landing on wet resin stays in the finish for good.
Sun, grip and cleaning
- Plain epoxy yellows in direct sun, so ask for a polyurethane topcoat.
- A smooth gloss turns slippery when wet, so ask about anti-slip finishes.
- Hot-water or steam cleaning calls for polyurethane, not epoxy.
- Check the data sheet lists the chemicals your floor will meet.
Approval for self levelling epoxy
- Ask your municipality's building control before changing walls, structure or room use.
- Food businesses should ask their environmental health office which floor finish they accept.
- Sectional title owners should check the conduct rules before work starts.
Self levelling epoxy services
| Service | What to ask for |
|---|---|
| Office and shop floors | Colour sample and gloss level agreed upfront |
| Workshop and factory floors | Thickness and chemical resistance stated in the quote |
| Uneven slab levelling | Screed or epoxy mortar priced as its own line |
| UV-stable topcoat | Polyurethane layer for sunlit areas |
| Anti-slip finish | Grip tested wet before the final coat |
| Floor repairs and recoats | Patch plan for chips, pinholes and wear |
Practical self levelling epoxy tips
- Resin use is roughly 1.8 to 2 kg per m² per mm.
- One Dekster 116 kit covers about 4 m² at 3 mm.
- Thin self-levelling coatings suit up to 2 mm, screeds up to 4 mm.
- Levelling screed under epoxy can go on from 0.4 mm to 15 mm.
- Ask for the product data sheet and the thickness you will get.
- Ask the warranty to name peeling, yellowing and slip resistance.
What to send with your request
- Floor size in m²
- Photos of the whole slab
- Current floor finish
- Vehicles, forklifts or chemicals
- Known damp, cracks or sun
You choose the quote that suits you. Installers are independent businesses, and leaderr is free to use.
Frequently asked questions
What does self levelling epoxy cost per m²?
Expect about R165 – R300 for thin systems and R350 – R800 for 3 to 5 mm floors. Ask whether VAT is included.
How long does a self levelling epoxy floor last?
It depends on slab prep, thickness and sun exposure. Get the warranty in writing and check it covers peeling and yellowing.
Do I need approval for a self levelling epoxy floor?
Ask your municipality's building control if you are also changing walls, structure or use. Complex owners should check with the body corporate.
Is self levelling epoxy better than flake or roller epoxy?
It gives a smooth, seamless gloss, while flake epoxy gives more grip. Thin roller coats cost less but do not flow out flat.
Why do some self levelling floors show bubbles or pinholes?
Air rises from unsealed concrete, or spike rolling was skipped. A good primer and a moisture check prevent most of it.
Hoeveel kos 'n epoksievloer wat self gelyk vloei per m²?
Dun stelsels kos ±R165 tot ±R300 per m², en 3 tot 5 mm-vloere ±R350 tot ±R800. Vra tot 5 kwotasies en kies die beste aanbod.
Self Levelling Epoxy near you
Compare quotes from 5-Star rated experts near you.
Other epoxy flooring types
View popular areas →